Digisol DG-GS1512HP User Manual Download Page 191

Page: 191 / 234

DG-GS1512HP User Manual

189

4.14.2. Firmware

4.14.2.1. Upgrade / Backup

This page allow user to upgrade or backup firmware image through HTTP or TFTP
server.

To display firmware upgrade or backup web page, click

Management > Firmware >

Upgrade/Backup

igure 152 - Management > Firmware > Upgrade/Backup

Item

Description

Action

Firmware operations

•

Upgrade: Upgrade firmware from remote host to DUT.

•

Backup: Backup firmware image from DUT to remote host.

Method

Firmware upgrade / backup method.

•

TFTP: Using TFTP to upgrade/backup firmware.

•

HTTP: Using WEB browser to upgrade/backup firmware.

Filename

Use browser to upgrade firmware, you should select firmware
image file on your host PC.

Summary of Contents for DG-GS1512HP











































































































































































































































Search results

Summary of Contents for DG-GS1512HP

Reviews:

Digisol DG-GS1512HP, User Manual, Page: 191 / 234

Search results

Summary of Contents for DG-GS1512HP

Reviews: