Digisol DG-GS1512HP User Manual Download Page 208

Page: 208 / 234

DG-GS1512HP User Manual

206

Item

Description

Community

The SNMP community name. Its maximum length is 20
characters.

Type

SNMP Community mode

•

Basic: SNMP community specifies view and access right.

•

Advanced: SNMP community specifies group.

View

Specify the SNMP view to define the object available to the
community.

Access

SNMP access mode

•

Read-Only: Read only.

•

Read-Write: Read and write.

Group

Specify the SNMP group configured by the command snmp
group to define the object available to the community.

4.14.4.4. User

To configure and display the SNMP users, click

Management > SNMP > User

igure 167 - Management > SNMP > User

Summary of Contents for DG-GS1512HP











































































































































































































































Search results

Summary of Contents for DG-GS1512HP

Reviews:

Related manuals for DG-GS1512HP

Brands by name

Popular brands

Digisol DG-GS1512HP, User Manual

Search results

Summary of Contents for DG-GS1512HP

Reviews:

Related manuals for DG-GS1512HP

Brands by name

Popular brands