Digisol DG-GS1512HP User Manual Download Page 69

Page: 69 / 234

DG-GS1512HP User Manual

interface.

Mode

Select port voice VLAN mode

•

Auto: Voice VLAN auto detect packets that match OUI

table and add received port into voice VLAN ID tagged

member.

•

Manual: User need add interface to VLAN ID tagged

member manually.

QoS Policy

Select port QoS Policy mode

•

Voice Packet: QoS attributes are applied to packets with

OUIs in the source MAC address.

•

All: QoS attributes are applied to packets that are

classified to the Voice VLAN.

4.5.2.2. Voice OUI

This page allow user to add, edit or delete OUI MAC addresses. Default has 8 pre-

defined OUI MAC.

To display the Voice OUI Web page, click

VLAN > Voice VLAN > Voice OUI

Figure 49 - VLAN > Voice VLAN > Voice OUI

Summary of Contents for DG-GS1512HP











































































































































































































































Search results

Summary of Contents for DG-GS1512HP

Reviews:

Related manuals for DG-GS1512HP

Brands by name

Popular brands

Digisol DG-GS1512HP, User Manual

Search results

Summary of Contents for DG-GS1512HP

Reviews:

Related manuals for DG-GS1512HP

Brands by name

Popular brands