Digisol DG-GS1510PL User Manual Download Page 6

Page: 6 / 60

DG-GS1510PL User Manua

Page 5

Products introduction

This is a Gigabit Web Managed POE Switch, It provides 8 10/100/1000Mbps Auto-Negotiation RJ45 POE ports

and 2 Gigabit SFP Ports . It supports the port's full line speed forwarding to ensure the stable transmission of

data. The machine can be used as a small local core switch or a small and medium-size LAN switch, also can

be used as an access switch for large LAN. It can be widely used in monitoring, wireless, Internet cafe and

other fields.

8 Port 10/100/1000Base-TX with 2 Gigabit SFP and 8 PoE L2+ Managed Switch

Front panel

PWR LED

：

The Power LED lights up when the Switch is connected to a power source.

Link/Act LED: The Link/Act LED will flash which indicates a network link through the corresponding port.

Blinking indicates that the Switch is either sending or receiving data to the port.

PoE LED:

Green: Indicates the PoE powered device (PD) is connected and the port supplies power successfully.

Light off: Indicates no powered device (PD) connected.

RST: By pressing the Reset button for 5 seconds the switch will change back to the default

configuration and all changes will be lost.

Warning: The SFP ports should use UL listed Optical

Transceiver product, Rated Laser Class I. 3.3Vdc.

Real panel

Grounding: use specialized ground lead connect

Connect the power adapter output terminal to this port. Supports input vo44 ~ +57 VDC

Summary of Contents for DG-GS1510PL





























































Search results

Summary of Contents for DG-GS1510PL

Reviews:

Related manuals for DG-GS1510PL

Brands by name

Popular brands

Digisol DG-GS1510PL, User Manual

Search results

Summary of Contents for DG-GS1510PL

Reviews:

Related manuals for DG-GS1510PL

Brands by name

Popular brands