DG-GS1510PL User Manua
l
Page 24
To create or modify the port trunking, the user need to select a port trunking ID, port trunking ID from 1
to 3. The user clicks the list box the appropriate port trunking ID, the port trunking of information is
displayed in the group port. To create a Trunk group, select the appropriate ID in the port trunking ID, click
the button "Trunk ID Settings." To set the port trunking method, select one port trunking method, click the
button "polymerization Settings." To increase the trunking ports, the port can be configured to select the
trunking port in the configurable, click on "members of the port =" "key. Aggregation from the existing port
to remove a port group member ports in the trunking port selected, click on "non-member port" = "key. To
delete the entire TRUNK group, then click the "Delete trunk group" button.
In page configuring process, if at least one Trunk has been established then polymerization
settings can take effect; configured Trunking method is also applied to all on the Trunk groups; in that
already exist on the Trunk can add or remove Port members ; You can only delete the Trunk group
when it doesn’t have any member ports.
Switch supports maximum 3 groups port trunking. Trunk1 and Trunk2 can not used for trunking
Gigabit ports, and each group can be aggregated up to the four same attributes port. Trunk3 can only
aggregate Gigabit ports, and up to 2 Gigabit ports can be aggregated. Port aggregation method is
common to all of the Trunk.
Figure 20 Port Trunking configuration page
