DG-GS1510PL User Manua
l
Page 32
6. SNMP Configuration
（
1
）
SNMP share body configuration page
Figure 29 is a shared body of SNMP configuration page that allows users to configure the switch common
body name and read and write access, A total of 8 entries can be configured
By default, the switch there is a share name as public, the common body is read-only access. With this
correspondence, the activities of this page is only one entry, shared body names are public, access is read-only
access. When the switch through SNMP for network management, you need to configure a read-write
permissions to the shared body.
Figure 29 a shared body of SNMP configuration page
（
2
）
TRAP target configuration page
Figure 30 is the TRAP target configuration page that allows users to configure the workstation to receive
TRAP messages as well as the IP address of TRAP protocol packets of some of the parameters.
In the configuration entry, the name used to enter the TRAP name, IP address used to enter the target
address, SNMP version used to select the version of the TRAP packet, if you set successful, it will show in the
state to active. If the configuration was successful, SNMP TRAP functions will take effects ,in the event of link
up or link down, the switch will automatically send a TRAP packet to the target address
