Digisol DG-GS1510PL User Manual Download Page 22

Page: 22 / 60

DG-GS1510PL User Manua

Page 21

）

Broadcast storm control page

Figure 16 is the Broadcast Storm Control page. This page is used to do the suppression for configure port

broadcast packets, multicast packets and DLF packet.

Figure 16 Broadcast Storm control Page

（

）

Port speed limits page

Figure 17 is the port speed- limit page. This page is used to configure the port’s transmit and receive rate.

From the Port drop-down bar select the relevant ports. Bandwidth control of the send data-packets is used to

configure and display the bandwidth control it. If the port is not configured for bandwidth control, it is shown as
off. Cancel button is used to cancel the corresponding data packet to send bandwidth control. Receiving data

packets is used to configure and display the bandwidth control of receive data packets control ,the range is

1-1024000kbits, enter into force after the key press applications. If the port is not configured bandwidth control,

shown as off. Cancel button is used to cancel the corresponding receiving data packets bandwidth control.

Summary of Contents for DG-GS1510PL





























































Search results

Summary of Contents for DG-GS1510PL

Reviews:

Related manuals for DG-GS1510PL

Brands by name

Popular brands

Digisol DG-GS1510PL, User Manual

Search results

Summary of Contents for DG-GS1510PL

Reviews:

Related manuals for DG-GS1510PL

Brands by name

Popular brands