background image

26 

Reference & Installation Manual

enabled, the control panel sends the 

Zone Alarm Restore

 report codes (see 

section 9.2)

 to the monitoring station as soon as the zone returns to normal 

(zone closure) or upon disarming. 

9.17 Auto Report Code Programming

When using either the Contact ID or SIA Reporting Formats (see 

section 

9.7

 on page 24), the control panel can automatically program a set of 

default report codes. The Contact ID Reporting Format can be modified 
using the manual programming method (see 

section 9.7.4

 & 

section 9.7.5

 

on page 24) to program remaining report codes or to change some of the 
defaults. Enter any of the following sections to set the indicated report 
codes with the default values (FF) from the 

Automatic Report Codes List

 in 

the "EVO Programming Guide": 

9.18 Closing Delinquency Timer

(default = 

000

; disabled) When a partition in the system is disarmed, the 

control panel will start the corresponding partition’s Closing Delinquency 
Timer. If the Closing Delinquency Timer elapses before the partition is 
armed again, EVO will transmit a “Closing Delinquency” report code to the 
monitoring station. Enter a value from 001 to 255 days into the appropriate 
section. Enter 000 to disable the Closing Delinquency Timer. 

Section Description

[4030]

Resets all the report code sections to 00 (cleared).

[4031]

Sets all the report code sections to FF (defaults). 

Section Sets to Defaults (FF)

Reset Sections

[4032]

Zone Alarm and Restore Report Codes
Tamper and Restore Report Codes

[0201]

 to 

[0296]

[4033]

Keyswitch Arming Report Codes
Keyswitch Disarming Report Codes
Access Code Arming Report Codes
Access Code Disarming Report Codes

[0701]

 to 

[0732]

[0801]

 to 

[0832]

[2001]

 to 

[2099]

[2101]

 to 

[2199]

[4034]

Special System Report Codes

[3900]

 to 

[3909]

[4035]

Special Arming Report Codes
Special Disarming Report Codes

[3910]

 to 

[3919]

[3920]

 to 

[3929]

[4036]

Special Alarm Report Codes

[3930]

 to 

[3939]

[4037]

Trouble and Restore Report Codes

[3940]

 to 

[3991]

Partition 1: 

[3119]

Partition 3: 

[3319]

Partition 5: 

[3519]

Partition 7: 

[3719]

Partition 2: 

[3219]

Partition 4: 

[3419]

Partition 6: 

[3619]

Partition 8: 

[3819]

Summary of Contents for EVO192

































































Reviews: