Digifly cartesio 2 User Manual Download Page 61

Page: 61 / 71

Page 61

PC CONNECTION AND INTERFACE

To download your flight data to your PC, plug the optional PC

serial or USB cable into the middle socket on the base of your

Digifly Leonardo.

10.1

COMPETITION SOFTWARE COMPATIBILITY

The Digifly Leonardo / Cartesio2 instruments can communicate via a direct cable

connection with some of the commonly used competition software packages e.g.

CompeGPS, MaxPunkte, GpsDump, CheckIn-PWC.

With these programs is possible to upload competitions Waypoints, download flight

tracks with competition validation and to add automatically the digital signature required

for the On Line Contest (OLC).

The Digifly Vltools2008 software and the CompeGPS, MaxPunkte, GpsDump, CheckIn-

PWC software have two different and completely independent ways to connect to the

instrument:

To communicate with a PC connect the optional PC serial cable or USB cable in to the

left socket on the bottom of the vario, marked GPS.

10.2

CONNECTING WITH COMPEGPS, MAXPUNKTE, GPSDUMP, CHECKIN (PWC) SOFTWARE

10.2.1

UPLOADING COMPETITION WAYPOINTS

To upload competition Waypoints from your PC to the Digifly Leonardo/Cartesio2, install

on your PC one of the following software packages (CompeGPS, MaxPunkte, GpsDump,

CheckIn-PWC).

Select the correct COM port and set up the communications protocol to MLR 38400

baud.

Turn on the Digifly Leonardo/Cartesio2 instrument and navigate to the “MENU” screen.

With the up and down keys, highlight the “WPT COMP” menu, without entering it.

From your PC software (CompeGPS, MaxPunkte, GpsDump, CheckIn-PWC) select “send

Waypoints to the gps”.

Summary of Contents for cartesio 2








































































Search results

Summary of Contents for cartesio 2

Reviews:

Related manuals for cartesio 2

Brands by name

Popular brands

Digifly cartesio 2, User Manual

Search results

Summary of Contents for cartesio 2

Reviews:

Related manuals for cartesio 2

Brands by name

Popular brands