Digifly cartesio 2 User Manual Download Page 17

Page: 17 / 71

Page 17

2.11

SUB SCREENS

On each of the main display screens; Thermal Display screen, Glide Compass Display

screen and Glide Plotter Display screens there are 3 fully customizable sub-pages, a

total of 9 sub-pages are already setup and configured with information related to:

scroll between the each sub-page, press the

key.

Sub-page "1" is preset with all information related to the WP1 (the current Waypoint)

and is easily recognized by the icon "1" on the display status bar.

Sub-page "2" is preset with all information related to the WP2 (the next Waypoint ) and

is easily recognized by the icon "22" on the display status bar.

Sub-page "3" is preset with all information related to the arrival Waypoint (GOAL) and is

easily recognized by the icon "GOL" on the display status bar.

2.12 CUSTOMISABLE DATA FIELDS

It is possible to customise the pre-set screens.

On the Thermal Display Screen there are 5 data fields (highlighted here in red) that can

be customized to change the type of data to be displayed.

On the Glide Plot and Glide Compass Display Screens all 4 main data fields (highlighted

here in red) that can be customized to change the type of data to be displayed.

On the Glide Compass Display screen the inner triple instrument reference can also be

customized to display WP1, WP2, GOAL or Thermal.

The current Waypoint

The next Waypoint

Goal

Summary of Contents for cartesio 2








































































Search results

Summary of Contents for cartesio 2

Reviews:

Related manuals for cartesio 2

Brands by name

Popular brands

Digifly cartesio 2, User Manual

Search results

Summary of Contents for cartesio 2

Reviews:

Related manuals for cartesio 2

Brands by name

Popular brands