DigiDesign SYNC HD, Manual

Page: 64 / 103

SYNC HD Guide 58
To insert a time code window into a video signal
using the front panel controls:
1
Press Set, and use the Down and Up switches
to display Burn Enabled (burn EnA).
2
Press Set. The LED Time Code Display will
switch to display the current On or Off setting
for Window Burn.
3
Use the Down and Up switches to switch be-
tween the parameter values.
4
Press Set.
Based on the selected positional reference, the
time code character generator burns time code
addresses onto any video signal passing through
the SYNC HD.
Window Dub Display Options
If you need to change the appearance of the
window dub—in terms of size, vertical position,
horizontal position, and color—you need to use
Pro Tools or SYNC Setup software utility (Win-
dows only). These parameters cannot be ad-
justed from the SYNC HD front panel controls.
To insert a time code window into a video signal
using SYNC Setup (Windows only):
1
In the Dub Window section of SYNC Setup, se-
lect Window Enabled.
2
Specify the appearance of the window dub
with the pop-up menus for Vertical Position,
Horizontal Position, and Color.
Default Window Dub settings are listed in
“Restoring Factory Settings” on page 66.