DigiDesign SYNC HD, Manual

Page: 21 / 103

Chapter 2: Installation and Configuration 15
Configuring the SYNC HD in the
Session Setup Window
When the SYNC HD is connected through Loop
Sync and enabled in the Peripherals dialog, its
settings become available in the SYNC Setup
and Time Code Settings sections of the Session
Setup window.
Clock Source
When connected and configured in the Loop
Sync chain, the SYNC HD appears (as SYNC)
along with any Pro Tools|HD interfaces in the
Clock Source pop-up menu, located in the Ses-
sion Setup window.
Clock Source can be any device in the Loop Sync
chain. This lets you use any digital input source
available on any Pro Tools|HD interface (includ-
ing the SYNC HD) simply by selecting that de-
vice and source from the Clock Source menu.
Clock Reference
The selected Clock Source device determines
your choices for clock reference.
When Clock Source is the SYNC HD
When the SYNC HD is set to be the Clock
Source, it is the Loop Master. Clock, Positional
Reference, and Video Format selectors become
active in the SYNC Setup section of the Session
Setup window.
SYNC HD Clock Reference choices include:
• Internal/VSO
• Video In
• Video Reference (SD)
• Video Reference (HD)
• LTC
• Bi-Phase
• Pilot Tone
• AES/EBU
• Word Clock
• Loop Sync
Session Setup window
See the Pro Tools Reference Guide for more
information on the Session Setup Window.
SYNC HD selected as Clock Source in the Session Setup
window
Clock Source
Session
settings
SYNC
Setup
Time Code
Settings
Clock Source
SYNC Setup controls in the Session Setup window