8
4.1 Catrax Clip operation
CATRAX Clip
has a two-dimensional rotation system with two 24 V electromagnets
for activating the locks. It includes a microprocessor control board where a signal
enabling passage is sent through one of the inputs, depending on the passage
direction. If this signal is recognized, the equipment will allow the movement of the
arm of
. After half of the turning is complete (45 degrees), a 400
CATRAX Clip
milliseconds returning signal will be sent, informing the passage direction. After the
signal, the arm cannot be returned to the previous position.
Depending on the
model and configuration, if the passage is forced
CATRAX Clip
without the enabling signal, an electromagnet will be activated to prevent passage.
In addition, the equipment can emit a signal for a sound alarm and/or the exhibition
of a red sign on the upper panel display (models with pictogram). In this case, a
return signal will be sent, indicating that the turnstile was forced, informing the
direction of turn.
The image below shows how
mechanism works:
CATRAX Clip's
clip
