11
5.3 Assembling the arms
INFORMATION:
-
The cover to access the screws is open/closed by pressure (fitting).
-
To assemble the
arms, use an Allen n.5 wrench.
CATRAX Clip's
After drilling the floor and assembling the column, it is possible to assemble the arms
and plastic covers.
The sequence below shows the instructions to help assembling
arms.
CATRAX Clip's
Digicon suggests that two people assemble the arms.
1. With
already unboxed and installed, set the arms close to the tube's
CATRAX Clip
frontal holes (central axis). First, fit the arm's lower rod and press the upper rod so it
reaches the respective hole.
2. Once the arm has both rods duly fitted, turn the arm to one side up to about 180
degrees or until it reaches the end of its track. You will notice there are two holes on
the back of the tube.
3. Use an Allen n.5 wrench to fasten the arms to the holes using the bolts and
washers provided with the product.
1º)
2º)
3º)
4º)
clip
