15
6.2 Operation pictogram kit
The operational pictogram kit visually signals if the passage is cleared or not (through
green and red pictograms) on
front.
CATRAX Clip's
Passage
cleared
(green)
Passage
not cleared
(red)
TIP:
To obtain information about the collecting box kit's configuration,
consult item 6.5 Control board
.
clip
6.3 Power supply
This power supply was especially designed for the CATRAX
. Among the main
line
advantages of this optional item, is its adaptation capability to the voltage
variations often found in installation sites – the input voltage can vary between 100
and 240 Vca.
The supply's specific technical features, protections and dimensions were carefully
tested and approved in hostile temperature and environmental conditions, which
ensures the adequate power supply to the equipment's performance. Besides the
input and output voltages indicated in the image below, the supply has a short-
circuit and overheating protection.
Input:
100 A 240 Vca
Output:
Ground
Neutral
Phase
12V 5% / 3A
+-
GND
TIP:
The power supply can be mounted to the board's support that
accompanies
CATRAX Clip.
