Digicom VoiceGate ATA, User Manual

Page: 78 / 90

AUTO UPDATE PROCEDURES:
Every time the VoIP Gateway reaches the Scheduling date and time, it will check if there is an up to date
firmware available on FTP Server and update the firmware automatically.
It takes about 3 minutes to update the new firmware, the SIP LED starts blinking while updating the
firmware.
Once the SIP LED stops blinking, the VoIP Gateway will reboot itself to active the new firmware.
Be noted:
If the VoIP Gateway is powered off and passed the Next update time , it will not update the firmware after
you power on the VoIP Gateway. It will only update when the VoIP Gateway is powered on and reaches Next
update time .
If you are on the phone having a conversation via VoIP and the Next update time is passing, it will update
the firmware immediately after you hang up the phone.
5. IVR Interface for VoIP Gateway
You can use the PSTN phone to configure the VoIP Gateway. Please follow the instruction to configure your
VoIP Gateway.
Group IVR Action IVR Menu
Choice
Parameter(s) Notes:
Function Reboot #195# None After you hear “Option
Successful,” hang-up. The
system will reboot
automatically.
Function Factory Reset #198# None System will automatically
Reboot. WARNING: ALL
“User-Changeable”
NONDEFAULT SETTINGS
WILL BE LOST! This will
include network and service
provider data.
Info Check IP Address #120# None IVR will report the LAN port IP
address
Info Check IP Type #121# None IVR will report the WAN Port
DHCP is enabled or disabled.
Info Check the Phone
Number
#122# None IVR will report current in use
VoIP number
Info Check Network
Mask
#123# None IVR will report the WAN Port
network mask