4. Put the
TA2S_701250
.gz
and
TA2S_ver.dat
in Server
AUTO UPDATE PROCEDURES:
Every time the VoIP Gateway reaches the Scheduling date and time, it will check if there is an up to date
firmware available on
TFTP Server
and update the firmware automatically.
It takes about
3 minutes
to update the new firmware, the SIP LED starts blinking while updating the
firmware.
Once the SIP LED stops blinking, the VoIP Gateway will reboot itself to active the new firmware.
Be noted:
If the VoIP Gateway is powered off and passed the
Next update time
, it will not update the firmware after
you power on the VoIP Gateway. It will only update when the VoIP Gateway is powered on and reaches
Next
update time
.
If you are on the phone having a conversation via VoIP and the
Next update time
is passing, it will update
the firmware immediately after you hang up the phone.
Example 5:
Auto Configuration Settings (Firmware update by Scheduling)
Update via:
FTP
Update via:
FTP
FTP Server:
192.168.10.100
FTP Username:
1234
FTP Password:
1234
File Path:
/
Check new Firmware:
Scheduling
Automatic Update:
Automatic (Scheduling)
Firmware File Prefix
: TA2S
Summary of Contents for VoiceGate ATA
