4. Put the
TA2S_701250
.gz
and
TA2S_ver.dat
in Server
AUTO UPDATE PROCEDURES:
Power on the VoIP Gateway and it will check if there is any firmware update on the Server. If a newer
firmware is avilable, it will only notify you with “
BEEP BEEP BEEP
” after you pick up the phone.
Please press
#190#
and then hang up the phone to unlock the special key on keypad.
Pick up the phone again and then press
#160#
, then hang up the phone to have your VoIP Gateway
firmware upgraded immediately.
It takes about
3 minutes
for updating the new firmware and the SIP LED starts blinking while updating the
firmware.
Once the SIP LED stop blinking, please power off and then power on the VoIP Gateway to active the new
firmware.
Example 2: TFTP - Firmware update by notification when powered on
Auto Update Settings
Update via:
TFTP
TFTP Server:
192.168.10.100
Check new Firmware:
Power ON
Automatic Update:
Notify only
Firmware File Prefix
: TA2S
Summary of Contents for VoiceGate ATA
