Single Caller ID
Default is
Off (disable)
. When it was
Yes (enable)
, It’ll detect the Singel
Caller ID.
CID Without Time
Default is
Off (disable)
. When it was
Yes (enable)
, It’ll detect the Caller
ID without time.
CID Type 2
Default is
Off (disable)
. When it was
Yes (enable)
, It’ll detect the Caller
ID Type 2.
Submit Button
When you finished the setting, please click the
Submit
button.
Reset Button
You can reset the configured parameters before you submit
Back Button
Go back to the previous web page
4.2.3.3.5 Dial Plan function
Number to add or replace before dial the phone number.
Drop Prefix
Default is
NO (Add the Prefix)
. When it was
Yes (Drop the Prefix)
,
It’ll drop the prefix.
NO (Add the Prefix):
When it meets the rule which you configured, it’ll
add the prefix.
Maximum input digits are 7
.
Yes (Drop the Prefix):
When it meets the rule which you configured, it’ll
drop the prefix and replace the number which you configured.
Maximum
input digits are 31
.
Replace rule1
Replace rule2
There are total 4 replace rules for use.
Summary of Contents for VoiceGate ATA
