4.2.3.1.5 DTMF Setting
You can setup the Out-Band DTMF and Send DTMF SIP Info Enable/Disable in this page. To change this
setting, please follow your VoIP Service Provider’s information. When you complete the setting, please click
the
Submit
button.
• RFC 2833:
Click this button to send Mid-Call DTMF tones in RTP packets separately using RFC2833, i.e.,
dynamic negotiation of RTP payload for DTMF digits will be done.
• Inband DTMF (IN AUDIO):
Click this button to send Mid-Call DTMF tones in RTP packets with the
same payload as voice, i.e., dynamic payload negotiation for DTMF digits will not be done.
• Send DTMF SIP Info:
This field is configurable when RFC 2833 is selected as the DTMF Relay
mechanism. Specify the payload number that needs to be used for DTMF information negotiated in SDP
during SIP signaling.
4.2.3.1.6 RPort Function
You can setup the RPort Enable/Disable in this page. To change this setting, please follow your VoIP Service
Provider’s information. When you complete the setting, please click the
Submit
button.
4.2.3.1.7 QoS
You can setup the
Hold by RFC
,
Voice/SIP QoS
,
SIP expire time
and
Use DNS SRV
in this page. To
change these settings please follow your ISP information. When you complete the setting, please click the
Submit
button.
Summary of Contents for VoiceGate ATA
