S M - 5 3 0 0 S e r v i c e M a n u a l
S M - 5 3 0 0 S e r v i c e M a n u a l
|
|
6
6
Safety Information
Safety Information
–––––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––
Safety Information
Safety Information
The operator of the
The operator of the equipment shall comply with the safety and
equipment shall comply with the safety and warning indications and procedures
warning indications and procedures
outlined in this document. Teraoka Weigh-System Pte. Ltd. assumes no responsibility or liability for
outlined in this document. Teraoka Weigh-System Pte. Ltd. assumes no responsibility or liability for
failure to comply with these requirements.
failure to comply with these requirements.
To avoid electric shock, use only the supplied power cords and ensure product is connected to a
To avoid electric shock, use only the supplied power cords and ensure product is connected to a
properly grounded supply.
properly grounded supply.
Ensure product is placed on a
Ensure product is placed on a firm and level
firm and level surface before operation.
surface before operation.
Avoid overloadin
Avoid overloading the produc
g the product beyond its rated m
t beyond its rated maximum capac
aximum capacity.
ity.
Care shall be
Care shall be taken during the following operations
taken during the following operations
o
o
Receipt paper tearing
Receipt paper tearing
–
–
to prevent injuries from cutting from paper cutter
to prevent injuries from cutting from paper cutter
o
o
Changing of labels and receipt paper
Changing of labels and receipt paper - to prevent injuries
- to prevent injuries from cutting from paper cutter
from cutting from paper cutter
and movable printer
and movable printer mechanism.
mechanism.
Repair and servicing of product, shall
Repair and servicing of product, shall only be carried out
only be carried out by trained and qualified personnel.
by trained and qualified personnel.
Disclaimer:
Disclaimer:
Specifications are subject to change without notice. All dimensions shown are approximate. Please be
Specifications are subject to change without notice. All dimensions shown are approximate. Please be
aware that Teraoka Weigh-System Pte. Ltd. has indicated that
aware that Teraoka Weigh-System Pte. Ltd. has indicated that its hardware and software used in
its hardware and software used in the
the
product may require additional updates in the
product may require additional updates in the future as our product is
future as our product is continually under developmen
continually under development.
t.
The need for such
The need for such updates most likely applies to the Printer
updates most likely applies to the Printer software.
software.
CAUTIONS:
CAUTIONS:
FOR PLUGGABLE EQUIPMENT, THAT THE SOCKET-OUTLET SHALL BE INSTALLED NEAR
FOR PLUGGABLE EQUIPMENT, THAT THE SOCKET-OUTLET SHALL BE INSTALLED NEAR
THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE.
THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE.
POUR LE MATÉRIEL RACCORDÉ PAR PRISE DE
POUR LE MATÉRIEL RACCORDÉ PAR PRISE DE COURANT, LE SOCLE DE PRISE DE
COURANT, LE SOCLE DE PRISE DE
COURANT DOIT ÊTRE
COURANT DOIT ÊTRE
INSALLÉ À PROXIMITÉ DU MATÉRIEL ET DOIT ÊTRE AISÉMENT ACCESSIBLE.
INSALLÉ À PROXIMITÉ DU MATÉRIEL ET DOIT ÊTRE AISÉMENT ACCESSIBLE.
FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH SAME TYPE
FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH SAME TYPE
AND RATING OF FUSE.
AND RATING OF FUSE.
POUR NE PAS COMPROMETTRE LA PROTECTION CONTRE LE
POUR NE PAS COMPROMETTRE LA PROTECTION CONTRE LES RISQUES D’INCENDIE,
S RISQUES D’INCENDIE,
REMPLACER PAR UN FUSIBLE DE MÊME TYPE ET
REMPLACER PAR UN FUSIBLE DE MÊME TYPE ET DE MÊME CARACTÉRISTIQUES
DE MÊME CARACTÉRISTIQUES
NOMINALES.
NOMINALES.
