Digi SM-5300 Series, Service Manual

Page: 130 / 132

S M - 5 3 0 0 S e r v i c e M a n u a l S M - 5 3 0 0 S e r v i c e M a n u a l | | 130 130
Revision Records Revision Records
–––––––––––––––––––––––––––––––––––––––– –––––––––––––––––––––––––––––––––––––––––––––––––––––– ––––––––––––––
SM-5300 (Doc. No. SER-SM-087) SM-5300 (Doc. No. SER-SM-087)
Revision Records Revision Records
Serial Serial No. Date No. Date Description Description of of Changes Changes Software Software Version Version Remarks Remarks
001 001 01 01 Jun Jun 2014 2014 First First Release Release V15.33.33- V15.33.33-3 3 Tentative Tentative
Edition
Edition
002 002 05 05 Aug Aug 2014 2014 1) 1) Adding Adding the the Loadcell Loadcell type type on on
the specification. the specification.
2) Updating the block diagram of
2) Updating the block diagram of
Bench and Pole type.
Bench and Pole type.
3) Update model specification for
3) Update model specification for
NAND flash memory replace by
NAND flash memory replace by
SD Card 8GB.
SD Card 8GB.
4) Update model specification for
4) Update model specification for
CPU A8 replaced by IMX6.
CPU A8 replaced by IMX6.
5) Adding the Cutter
5) Adding the Cutter Safety Safety
Information. Information.
6) Adding the drawing of W&M
6) Adding the drawing of W&M
Sealing.
Sealing.
7) Adding the procedure of VNC
7) Adding the procedure of VNC
Password. Password.
8) Adding the procedure of 8) Adding the procedure of
Wireless adapter setting (AP-
Wireless adapter setting (AP-
3001G).
3001G).
9) Adding the procedure of Base
9) Adding the procedure of Base
Station (BS-03) setup.
Station (BS-03) setup.
10) Adding the Major Parts
10) Adding the Major Parts
Disassembly drawing of Bench
Disassembly drawing of Bench
and Pole Type.
and Pole Type.
11) Adding the information of EV
11) Adding the information of EV
and SSP in model specification.
and SSP in model specification.
12) Adding the Port pin
12) Adding the Port pin
configuration of Cash Drawer
configuration of Cash Drawer
port.
port.
13) Adding the dimension of EV 13) Adding the dimension of EV
and SSP type. and SSP type.
14) Adding the Block Diagram of
14) Adding the Block Diagram of
EV and SSP type.
EV and SSP type.
15) Change the photo for new
15) Change the photo for new
design of Bench and Pole I/O
design of Bench and Pole I/O
port.
port.
16) Adding the I/O port and SD
16) Adding the I/O port and SD
Card insert direction of EV and
Card insert direction of EV and
SSP type.
SSP type.
17) Adding the procedure of Self
17) Adding the procedure of Self
Service Screen Exit to Main Menu
Service Screen Exit to Main Menu
Screen.
Screen.
18) Adding the Self Service
18) Adding the Self Service
display indicator layout. display indicator layout.
V15.37.36- V15.37.36-5 5 Edition 1 Edition 1