Digi SM-100 Service Manual Download Page 49

Page: 49 / 98

SM 100 MISCELLANEOUS

To check how many time the thermal head had been printing.

OPERATION

DISPLAY

REMARK

/kg

Go to Z mode

Z1.0 RESET SALES

DAILY

Z mode.

Lamp Z turns on.

[[0][8][2][3] PRINTER

USAGE

Display thermal printer usage

condition(meter).

[T]

Z1.0

RESET

SALES

DAILY

[T] key to exit.

7.5 IP

ADDRESS

To check and modify the scale IP address.

OPERATION

DISPLAY

REMARK

/kg

Go to Z mode

Z1.0 RESET

SALES

DAILY

Z mode.

Lamp Z turns on.

[[0][4][1][6] SCALE

19216800

0000

Display the scale IP address.

[1][9][2][0][0]

[9][1][0] [0]

SCALE IP 19200910

0000

Modify the IP address.

[#]

----------

Save the new IP address.

Press [T] key to exit.

7.6

SERVER IP ADDRESS

To check and modify the server IP address.

OPERATION

DISPLAY

REMARK

/kg

Go to Z mode

Z1.0 RESET

SALES

DAILY

Z mode.

Lamp Z turns on.

[[0][4][1]7] SERVER

25525525

5000

Display the server IP address.

[1][9][2][0][0]

[9][1][0] [0]

SCALE IP 19200910

0000

Modify the server IP address.

[#]

----------

Save the new IP address.

Press [T] key to exit.

7.7 SUBNET

MASK

All manuals and user guides at all-guides.com

Summary of Contents for SM-100



































































































Search results

Summary of Contents for SM-100

Reviews:

Related manuals for SM-100

Brands by name

Popular brands

Digi SM-100, Service Manual

Search results

Summary of Contents for SM-100

Reviews:

Related manuals for SM-100

Brands by name

Popular brands