Digi SM-100 Service Manual Download Page 48

Page: 48 / 98

SM 100 MISCELLANEOUS

7. MISCELLANEOUS

7.1 MODE

CHANGE

To toggle between R, X, S, Z and Password mode.

OPERATION

DISPLAY

REMARK

/kg

0.000

0.00

Weight mode.Lamp R turns on.

[MODE],[MODE]

(within 3 seconds)

XMODE

Enter X mode.Lamp X turns on.

[MODE] S1

PLU FILE

Enter S mode.Lamp S turns on.

[MODE]

Z1.0

RESET

SALES

DAILY

Enter Z mode.Lamp Z turns on.

[MODE]

PWD

SET

Enter Password Set mode.Lamp X

flicker

[MODE]

0.000

0.00

Back to Weight mode.Lamp R turns on.

** The “X ” mark on the X, S, Z and R mean the indicator light is on. When in Passwomode,

the

indicator light will be blinking.

7.2

SPAN SWITCH STATUS

To check the status of the span switch.

OPERATION

DISPLAY

REMARK

/kg

Go to Z mode

Z1.0

RESET

SALES

DAILY

Z mode.

Lamp Z turns on.

[[2][8][4] STE16

VX.XX

S-OFF

Enter [2][8][4] while depressing

[Rezero].

Z1.0

RESET

SALES

DAILY

Exit after 3 seconds.

7.3

CLEAR ALL PLU DATA

To clear all the PLU data only, the span switch status must be on.

OPERATION

DISPLAY

REMARK

/kg

Go to Z mode

Z1.0

RESET

SALES

DAILY

Z mode.

Lamp Z turns on.

[[2][3][0] CLEAR

PLU FILE

Enter [2][3][0] while depressing

[Rezero].

CLEAR

PLU

Y--C N--T

Enter C for Yes, Enter T for No..

C(T)

Z1.0

RESET

SALES

DAILY

Back to Z mode

7.4

THERMAL HEAD USAGE

All manuals and user guides at all-guides.com

Summary of Contents for SM-100



































































































Search results

Summary of Contents for SM-100

Reviews:

Digi SM-100, Service Manual, Page: 48 / 98

Search results

Summary of Contents for SM-100

Reviews: