manualshive.com logo in svg

Digi SM-100, Service Manual, Page: 22 / 98

Share
Download
Digi SM-100 Service Manual Download Page 22

SM 100                                                    SOFTWARE SETTING           

 

 

20

4 SOFTWARE 

SETTING 

 
4.1 

SOFTWARE VERSION UPGRADE 

 

Æ

  Update Method Introduction 

SM-100 use flash RAM instead of EPROM for the main program storage of the scale. 
Before the boot program Version 1.10, we just have one method to update the scale’s 
software: PC to scale via RS232 interface. 
After the boot program Version 1.10 (including V1.10), we add a new method to update 
the scale’s software: update the scale by ethernet.    So you can choose either method 
between these two ones to update your scale. 
Now we will set two parts to introduce the steps of these two updating methods. 
 

Æ

  Update Steps Introduction

 

I.  Ethernet Update Method 

1.  Cable & Connection 
There are also two ways to connect the PC and the scale in updating the scale by 
ethernet. 
1)  PC to Scale 

 

2)  Connect by Hub 

 

PC 

Sm-100 

      Crossing Twisted Cable   

PC 

Sm-100 

Normal                      Normal 

Twisted Cable     Twisted Cable 

HUB 

All manuals and user guides at all-guides.com

Summary of Contents for SM-100



































































































Reviews:

No comments