Digi DC-530 Operation Manual Download Page 48

Page: 48 / 62

DC-530 Operation Manual

delete all data associated with the 25 items in memory.

3. In the Item Programming menu, press the

key to enter the Delete All Items mode. The scale will

prompt you to confirm that you want to delete all items in memory.

4. To exit without deleting all Item Codes in memory, press

and you will be returned to the Item

Programming Menu. To confirm the deletion of all Item Codes in memory, press

. The display will turn

red and confirm that the deletion is in process, then return you to the Item Programming Menu.

5. To exit the Program Mode, press the

TARE

key twice.

6. Press the

key to return to the Weigh Mode.

6.4

Setting a General Setpoint

User Specifications 01 and 02 set the parameters of the DC-530’s use of any setpoints that are programmed.
User Specification 01, Bits 3 and 2 - Set Point Operation, establish whether setpoints will be associated with

individual Item Codes or be general or common setpoints applied to all items. The specification can also be set

to not allow any setpoints to be programmed.

•

If Specification 01, Bits 3 and 2 are set to 10: Item Set Point, the setpoints must be programmed in

the Item Registration or Item Edit procedures (See Section 6.1 or Section 6.2). In this case Option 4

on the Mode Menu - Set Point Setting is disabled.

•

If Specification 01, Bits 3 and 2 are set to 01: Common Set Point, the setpoints must be programmed

in the Set Point Setting screen as described below and the cursor will not move to the Setpoint fields

in the Item Registration and Edit Item modes.

•

If Specification 01, Bits 3 and 2 are set to 00: No Operation, Option 4 on the Mode Menu - Set Point

Setting, is disabled and the cursor will not move to the Setpoint fields in the Item Registration and

Edit Item modes.

User Specification 02 sets the rest of the parameters of the DC-530’s use of the setpoints programmed:

•

Specification 02, Bit 0 - Setpoint Range, sets whether the range is negative or positive. The default

is 1: Positive. If set to 0: Negative, the buzzer only sounds on negative numbers.

•

Specification 02, Bit 1 - Setpoint Buzzer Output, sets whether the scale sounds an audible buzzer

when a setpoint is reached. The default is 1: Yes.

All manuals and user guides at all-guides.com

Summary of Contents for DC-530































































Search results

Summary of Contents for DC-530

Reviews:

Related manuals for DC-530

Brands by name

Popular brands

Digi DC-530, Operation Manual

Search results

Summary of Contents for DC-530

Reviews:

Related manuals for DC-530

Brands by name

Popular brands