Digi DC-530 Operation Manual Download Page 47

Page: 47 / 62

Scale Programming

4. Enter the three digit Item Code of the item to be deleted, then press the

key to call up that item. The

scale will display the information stored for that Item Code.

5. Press the

C (Clear)

key to delete this Item Code. The display will ask the operator to confirm that he

really wants to delete this item.

6. To cancel the deletion of this Item Code, press

. To complete the deletion of this Item Code, press

The display turn red and will read

PLEASE WAIT

while carrying out the deletion, then return to the Item

Delete Screen.

7. To exit the Program Mode, press the

TARE

key twice.

8. Press the

key to return to the Weigh Mode.

6.3.3

Deleting All Item Codes

The following procedure describes the steps used to delete

ALL

of the Item Codes stored in memory.

1. From the Counting Mode screen (either Normal Counting Mode or TEP Mode) press the

MODE

key to

move to the Mode Menu.

2. In the Mode Menu Screen, press the

key to enter the Item Programming Mode. The upper right hand

part of this screen will show how much of the 200 item memory is currently programmed. (In the

example below, 25 items have already been entered, 175 can still be entered.) The procedure below will

All manuals and user guides at all-guides.com

Summary of Contents for DC-530































































Search results

Summary of Contents for DC-530

Reviews:

Related manuals for DC-530

Brands by name

Popular brands

Digi DC-530, Operation Manual

Search results

Summary of Contents for DC-530

Reviews:

Related manuals for DC-530

Brands by name

Popular brands