Digi ConnectPort X Series User Manual Download Page 125

Page: 125 / 247

Configure the device using the Digi ConnectPort X Family web interface

Configuration through the web interface

Digi ConnectPort X Family

125

Status

: The firmware update status of the node. The possible status values are as follows:

Unknown

: The current firmware version is not known. The firmware version either has not

yet been read from the node or cannot be read from the node.

Up to date

: The node is running the latest firmware version available on the gateway.

Available

: A newer version of firmware is available on the gateway. Select the node and

click

Update

to schedule an update. Schedule an update by issuing the

xbee fw_update

command or from the

Configuration

XBee Network

OTA Firmware Update Status

page in the web interface.

Scheduled

: A firmware update is scheduled to be performed on this node.

Updating

: A firmware update is now being performed on this node.

Updated

: A successful firmware update has been performed on this node.

Complete

: The node has rejoined the network after a successful firmware update.

Canceled

: A user canceled firmware update for this node. Select the node and click

Update

to restart the update.

Error

: A firmware update on this node has failed. Select the node and click

Update

restart the update. You can schedule an update issuing the

xbee fw_update

command or

from the

Configuration

XBee Network

OTA Firmware Update Status

page on the

web interface.

Update File

: The firmware file used to update the node.

Refresh

: Display the latest firmware update status.

Update selected nodes with firmware file

: To use the file listed in the table for each node,

choose

Update File

. To use a different file, choose a firmware file from the list Firmware files

are uploaded on the

Firmware Update Setup

page.

Use this router node as the updater

: The updater node is a router within radio range of the

node being updated. The updater sends the firmware image directly to the node during the

update process. Choose

Automatic

to use the best available updater node. Choose a router

from the list to use a specific updater node.

Update

: Schedule a firmware update of the selected nodes.

Cancel Update

: Cancel a scheduled firmware update of the selected nodes.

For additional information on XBee modules and networks, access the XBee Network page under

Administration

System Information

XBee Network

. The XBee Network page

displays more detailed information about XBee network devices, including counters related to any
applications that are exercising the devices. See

XBee Network

For detailed information about XBee module settings and operation, see the Product Manual for the
XBee RF module, available from the

Digi Support site

XBee firmware filename conventions

XBee firmware files use the following filename convention:

X_ABCDE_Y.EXT

Summary of Contents for ConnectPort X Series
























































































































































































































































Search results

Summary of Contents for ConnectPort X Series

Reviews:

Brands by name

Popular brands

Digi ConnectPort X Series, User Manual

Search results

Summary of Contents for ConnectPort X Series

Reviews:

Brands by name

Popular brands