Digi ConnectPort X Series User Manual Download Page 123

Page: 123 / 247

Configure the device using the Digi ConnectPort X Family web interface

Configuration through the web interface

Digi ConnectPort X Family

123

OTA firmware updates for XBee network nodes

OTA XBee firmware updates update the firmware for XBee network nodes. These firmware updates
are supported for XBee ZB modules only.

Update firmware over the air for XBee network modules

To perform OTA firmware updates for XBee network modules:

1. Download the appropriate firmware file from the

Digi Support site

2. On the gateway, upload the latest firmware files from the

Configuration

XBee Network

OTA Firmware Update Setup

page. The files must have the

extension

.ebl

You can upload multiple files, each containing a different firmware type needed by nodes on the

network.

3. Schedule and monitor updates of individual nodes on the

OTA Firmware Update Status

page.

Scheduled updates are performed in the background, one node at a time. When updating a

remote node, the remote note is not accessible from the XBee network. When updating the

XBee module in the gateway, the XBee network is not accessible from the gateway.

OTA Firmware Update Setup page

The

OTA Firmware Update Setup

page allows you to set up automatic firmware updates, upload

XBee firmware image files, and manage XBee firmware files. Several groups of settings on this page
control how gateway XBee firmware updates are performed:

Update Settings:

Enable over the air firmware updates

: Enable firmware updates on remote nodes over

the XBee network. Firmware updates use a background process to query remote nodes for

their current firmware version, and update their firmware from files stored on the

gateway. You can disable this process if you want to suspend firmware updates, or if the

update process interferes with applications using the network.

Automatically update nodes to the latest firmware version

: When a node reports its

firmware version and a newer version of firmware is available on the gateway, schedule a

firmware update without user action. Select this option if you want to automatically

update nodes as they join the network. If you do not select this option, you can manually

schedule firmware updates from the

Firmware Update Status

page.

Stop automatic updates if an update error occurs

: If an error occurs while updating a

node, suspend further updates of other nodes. You can resume updates by clicking

Apply

on this page.

Upload Files

: Use this section to upload XBee firmware files to the gateway. These files

contain the firmware image used to update nodes on the XBee network. You can upload

multiple files, each containing a different firmware type and version. Firmware files must end

with an .ebl extension. Click

Browse

to select a firmware file and then click

Upload

Summary of Contents for ConnectPort X Series
























































































































































































































































Search results

Summary of Contents for ConnectPort X Series

Reviews:

Brands by name

Popular brands

Digi ConnectPort X Series, User Manual

Search results

Summary of Contents for ConnectPort X Series

Reviews:

Brands by name

Popular brands