Digga SKID HOE, Operator'S & Parts Manual

Page: 13 / 22

13
8 insTallaTion and oPeraTinG insTrucTions
1. Place this product on a firm, level surface that is large enough to safely accommodate this product, your Loader, and all workers
involved in the mounting process.
2. Be sure all connection points are properly secured.
3. Refer to the operator’s manual(s) for your Skid steer loader, and quick-attach and follow the mounting instructions contained therein.
4. Carefully raise the loader arms and cycle the tilt cylinders to check clearances and to verify that all mounting procedures have been
successfully completed.
5. All Skid steer loaders MUST have a port relief installed on its hydraulic tilt circuit.
SKID HOE INSTALLATION
SKID HOE HYDRAULIC CONNECTION
1. Disconnect the hydraulic hose quick couplers from one another and attach the quick couplers to your Skid steer loader as per the
instructions in your Skid steer loader operator’s manual.
2. Carefully raise the loader arm and cycle the tilt cylinders to check hose clearances and to check for any interference.
NOTE: IT IS IMPORTANT TO MAkE SURE THE LOCkING MECHANISM ON YOUR QUICk
ATTACH IS ENGAGED, THEREFORE LOCkING THE ATTACHMENT ONTO THE MACHINE.
DO NOT LOCk THE AUxILIARY HYDRAULICS OF YOUR SkID STEER LOADER IN THE “ON”
POSITION. FAILURE TO OBEY THIS wARNING COULD RESULT IN DEATH OR SERIOUS INjURY.
SAFETY FIRST!! READ AND UNDERSTAND THE SAFETY
INSTRUCTIONS BEFORE BEGINNING ANY SkID HOE MOUNTING