Digga SKID HOE, Operator'S & Parts Manual

Page: 11 / 22

11
6 safeTY - sTicKer locaTion
PLACEMENT OR REPLACEMENT
OF SAFETY SIGNS
1. Clean the area of application with
non-flammable solvent, then wash
the same area with soap and water.
2. Allow the surface to fully dry.
3. Remove the backing from the safety
sign, exposing the adhesive surface.
4. Apply the safety sign to the position
shown in the diagram above and
smooth out any bubbles.
INSTRUCTIONS
● Keep all safety signs clean and legible.
● Replace all missing, illegible, or damaged
safety signs.
● Replacement parts for parts with
safety signs attached must also have
safety signs attached.
● Safety signs are available from your
dealer or from Digga Australia.
ITEM 1
ITEM 2
ITEM 3
1 2
3
3