Digga SKID HOE, Operator'S & Parts Manual

Page: 16 / 22

16
Product Manual: Skid Hoe - 2008
10 MainTenance
● Make sure that all nuts and bolts are in place and properly tightened.
● Make sure that all other fasteners are in place and are performing their specified function.
● Make sure that all hydraulic fittings are tightened and that there are no leaks in any fittings or hoses.
● Make sure that all safety signs are in place, are clean, and are legible.
(SEE THE SAFETY SIGN SECTION)
● Replace any damaged parts and excessively worn parts.
● Grease all (5) lubrication points.
SAFETY FIRST!! READ AND UNDERSTAND THE SAFETY
INSTRUCTIONS BEFORE BEGINNING ANY SkID HOE MAINTENANCE
BEFORE FIRST USE
BEFORE EACH USE
AFTER EVERY 4 HOURS OF OPERATION
● Inspect the attachment for shipping damage. If damage does exist, do not operate until the damaged
parts have been replaced or repaired.
● Grease all (5) lubrication points.
Escaping fluid under pressure can have
sufficient force to penetrate the skin causing
serious personal injury. Fluid escaping from
a very small hole can be almost invisible.
Use a piece of cardboard or wood, rather
than hands to search for suspected leaks.
keep unprotected body parts, such as-
face, eyes, and arms as far away as pos-
sible from a suspected leak. Flesh in-
jected with hydraulic fluid may develop
gangrene or other permanent disabilities.
If injured by injected fluid, see a
doctor at once. If your doctor is not
familiar with this type of injury,ask
him to research it immediately
to determine proper treatment.
WARNING!
CARDBOARD
HYDRAULIC HOSE
OR FITTING
MAGNIFYING GLASS