Digga PD 30 HP-7, Operator'S Manual

Page: 39 / 44

39
13 AUGERS AND WEAR PARTS
As the auger is engaging the ground, wear must occur to dig holes. Therefore, the auger teeth and pilot must be checked regularly and
replaced with new wear parts. Failure to do so will damage the auger pockets and flighting.
THIS WILL CAUSE COSTLY REPAIR TO YOUR AUGER.
AUGER OAL
FLIGHT
THICKNESS
STD SIZES AVAILABLE TEETH SUITABLE DRIVES
A11/RC11* 1550mm 12/16mm 150mm (6”), 1500mm (60”) TTL SD
TEETH PILOT
REF DESCRIPTION QTY
L Clip (Lynch Pin) 1
M AUGER PIN 1
N AUGER 1
P WEAR PART - PILOT 1
Q WEAR PART *
IMPORTANT:
CHECK THE WEAR PARTS ON
YOUR AUGER ON A REGULAR
BASIS. ENSURE ALL
REPLACEMENT PARTS ARE
GENUINE DIGGA WEAR PARTS
L
M
N
P
Q
SUITABLE AUGERS
WEARPARTS FOR A11 / RC11 AUGER
*A11 AND RC11 AUGERS ARE THE SAME. NAME DIFFERS IN DIFFERENT COUNTRIES
PH-3XL
STD
Pilot
TTL
Multifacet Tungsten teeth are suitable for all
ground soil conditions, heavy clay, asphalt,
concrete, frozen ground, and fracturable rock.