1) Disassemble all parts, remember to remove the
O-ring valve
B
from the
heating element
C
2) Wash all parts with water and mild detergent and
rinse in water before placing in hot water or
sterilising. Check that there is no liquid left inside.
This is particularly important for the heating
element, as liquid can get trapped behind the
temperature measurement system
•
Cleaning by boiling water
:
Bring sufficient water to the boil and place
the permitted items (see table) in the
boiling water for three minutes
•
Cleaning in the dishwasher
:
Clean the permitted items (see table) by
placing these in the top section of the
dishwasher
•
Cleaning using a (microwave) steriliser
:
Follow the instructions on the steriliser. (only place the permitted
items in the steriliser) (see table) Do not place the
base unit
G
or
the
heating element
C
in the steriliser
Descaling the heating element
It is important to clean the
heating element
C
thoroughly after each
use and to descale at least once every 3 months for optimal operation.
Regular descaling helps to remove limescale. Descaling the
heating
element
C
prolongs the life of the heating element and ensures the
best possible heating results
Cleaning and sterilisation instructions for the
Difrax S-bottle warmer
Disassemble the S-bottle warmer and clean before each use
Clean the
base station
G
with a damp cloth regularly. Never use
harsh or antibacterial cleaning agents. Abrasive materials such as
scouring pads should not be used either. These may damage the
product
IMPORTANT !
•
NEVER
place the
base unit
G
or plug
in water,
dishwasher or steriliser, as this may permanently damage
these parts
•
DO NOT
boil the
heating element
C
or place it in an electric
steriliser or microwave (steriliser)
Damp
cloth
Dish-
washer
Electric
steriliser
A) Sealable cap
ü
ü
ü
ü
ü
B) O-ring valve
ü
ü
ü
ü
ü
C) Heating element
ü
û
ü
û
û
D-E) Bottle base
ü
ü
ü
ü
ü
F) Protective cap
ü
ü
ü
G) Base station
ü
û
û
û
û
Plug
û
û
û
û
In
boiling
water
S-bottle
Microwave
steriliser
11
10
