6) Screw the S-bottle body (V) firmly in place on the
bottle base
D
or
E
7) Unscrew the
bottle ring with the teat and
sealable disk
(III, II and IV) from the
bottle
body
(V)
1) Fill the S-bottle via the top with (breast)milk or
water
2) Because the
heating element
C
takes up space
in the bottle, the S-bottle holds 30 ml less food
than indicated on the volume indicator! Use the
top-up cap
A
to top up the missing 30 ml, fill
the
cap
A
and add this to the food already in the
S-bottle
• Do not heat frozen (breast)milk or frozen water in the S-bottle
warmer. Frozen food must be defrosted thoroughly first before
it can be heated
• Warm up (breast)milk or water first before you add your
(milk or porridge) powders
• The minimum amount of food you can warm up is 90 ml
• Press the
operating button
H
at least 3 sec. to turn on the
S-bottle heater
• Do not fill with liquids > 50˚C
How to use the Difrax S-bottle warmer
Assembling the Difrax S-bottle warmer
1) Place the
base station
G
on a stable surface
2) Insert the plug into the wall socket
3) Unscrew the
bottom with the s-bottle
valve
from
the S-bottle (VII and VI). These items you don’t
need anymore when you directly feed after
warming-up because all the advantages of the
vacuum system in the bottom of the S-bottle
warmer are pr0cessed
4) Press the
O-ring valve
B
firmly onto
the
heating element
C
in the notch with the raised
section facing upwards in order to prevent
leakage. Make sure the upstanding part is open
by squeezing it several times
5) Place the
heating element
C
in the
bottle base
of the correct size
D
or
E
and make sure the
O-ring valve is still firmly in place
D
:
White bottle base for S-bottle Natural 170 ml
and 250 ml
E
:
Black bottle base for S-bottle Wide 200 ml
and 310 ml
Check the
O ring valve
B
before every use. Small tears may
cause leaks
IMPORTANT !
IMPORTANT !
7
6