Diesse VES-MATIC EASY, Service Manual

Page: 3 / 76

Service Manual
[3/76] iii Rev.1.1 of 15/04/2017
CONTENTS
1. GENERAL DESCRIPTION OF THE INSTRUMENT ......................................................... 1
1.1. OVERALL VIEW OF THE UNIT .............................................................................. 2
1.2. TECHNICAL SPECIFICATIONS ............................................................................. 3
1.3. CONTENT AND PACKAGE DIMENSIONS ............................................................ 3
1.4. SHUTTING DOWN AND SHIPPING ....................................................................... 4
2. DISASSEMBLY PROCEDURE (AND REASSEMBLY) .................................................... 5
2.1. GRAPHICS ............................................................................................................. 6
2.2. PRELIMINARY TASKS ASSIGNED TO THE TECHNICAL SERVICE ................... 6
2.3. EQUIPMENT / INSTRUMENTATION REQUIRED ................................................. 7
2.4. DISASSEMBLY AND REASSEMBLY PROCEDURES ........................................... 7
3. CALIBRATIONS AND PERIODICAL CHECKS ............................................................... 8
3.1. PROCEDURE FOR CALIBRATING THE VES MATIC EASY FOLLOWING
DISASSEMBLY OR PERIODIC CHECKS. ........................................................................ 9
3.1.1. ACCESS TO THE SERVICE MENU ....................................................................... 9
3.1.2. TEST STATUS OF SENSORS & HOME PHOTOCELL ....................................... 11
3.1.3. MOTOR TEST ...................................................................................................... 11
3.1.4. SENSOR TEST..................................................................................................... 12
3.1.5. SENSOR CALIBRATION ...................................................................................... 12
3.1.6. BARCODE TEST .................................................................................................. 13
3.1.7. ADJUSTING THE CARRIAGE STROKE READING ............................................. 14
3.1.8. CONFIGURATION OF ID No. ............................................................................... 14
3.1.9. PRINT SETTINGS ................................................................................................ 14
3.1.10. CONFIGURATION OF TEST MODE ................................................................ 15
3.1.11. ANALYSIS COUNTER ..................................................................................... 16
3.1.12. PRINT ERRORS............................................................................................... 16
3.1.13. CYCLES TEST ................................................................................................. 16
3.2. CLEANING THE PRINTER HEAD ........................................................................ 17
4. LEARNING ABOUT THE UNIT- DESCRIPTION OF THE MAIN MODULES ................. 18
4.1. LEARNING ABOUT THE UNIT ............................................................................. 19
4.2. CPU BOARD ........................................................................................................ 20
4.2.1. Description of the module ....................................................................................................... 20
4.2.2. Applicable documentation ....................................................................................................... 20
4.2.3. Access to single modules ....................................................................................................... 21
4.3. VES EASY CONNECTION BOARD ..................................................................... 21
4.3.1. Description of the module ....................................................................................................... 21
4.3.2. Applicable documentation ....................................................................................................... 21