Diesse VES-MATIC EASY, Service Manual

Page: 22 / 76

Service Manual
Rev.1.1 of 15/04/2017 16 [22/76]
6. Repeat this procedure for all 10 positions of the Ves Matic Easy and verify that the result is the
same (+/-3) for each position.
3.1.11. ANALYSIS COUNTER
This menu allows to visualize the total number of analysis executed from the instrument.
(this data is not modifiable from software).
Procedure:
1. Select the it
em ‘READ ANA COUNTER’ from the Select test menu,
2. Press OK , the value will appear on the display:
3. Press a key to return to the previous menu.
3.1.12. PRINT ERRORS
This function sends to the printer the report containing the last 20 errors recorded by the instrument.
Procedure:
1.
Select the item ‘PRINT ERROR’ from the Select test menu
2. Press OK to enable the print.
It’s printed the date and the type of error for each recorded anomaly.
3.1.13. CYCLES TEST
This function allows the instrument to execute n cycles (programable) of analysis.
Use 10 test-tubes containing the test stick (Height:56mm) and insert them in all positions of the sample-
holder for the test before starting the cycles.
Procedure:
1.
Select the item ‘CYCLES TEST’ from the Select test menu and press
OK .
2. The instrument executes the print of the settings before starting the test procedure.
3. The number of cycles to be performed by the instrument is requested:
To enter the number of cycles (ESRII nr°max 250):
- use
▲/▼ to change the unit value.
- use Line Feed to increase the value to be set by 10 points use.
4. To confirm the value entered and start the cycles press OK .
The test can be aborted at any time by pressing
▲ and
OK
simultaneously. When the question “ARE
YOU S
URE?” is displayed on the screen, press
OK to confirm.
At the end of the procedure, the instrument prints the final report and automatically the software returns
to the previous menu.
COUNTER 0
CYCLE NUMBER 1