3.7.2
Closing the Safe Door
The mechanical combination lock MUST BE ACTIVATED
to maintain UL 291 24-hour Service Level 1 burglary
resistance protection.
The mechanical key lock does NOT provide burglary
resistance protection.
Perform the following steps to close safe doors that have a mechanical
combination lock:
NOTE
For the following procedure, refer to Figure 3-14.
1. Close the door of the safe. When the door is shut, the bolt work and
handle automatically close.
2. Rotate the mechanical combination lock dial at least three complete
revolutions counterclockwise and stop the dial at
0
to scramble the
combination. This action closes the lock bolt to lock the door shut.
3. If there is a keylock for the mechanical combination lock, insert the
key into the lock and turn the key counterclockwise until it reaches the
locked position.
4. Remove the key from the key slot.
5. Make sure that the handle of the safe does not rotate.
6. Pull firmly on the door of the safe to confirm that the safe is securely
locked.
7. Close the safe door cover and turn both fixed grip latches clockwise 90
degrees.
8. Insert the key for the safe door cover lock and turn the key
counterclockwise.
9. Remove the key from the key slot.
10. Pull the door cover to ensure that it is locked and secure.
3-30
Copyright ©Diebold, Incorporated (7/2015) - All Rights Reserved
Copyright ©Diebold Nixdorf, Inc. (4/2017, 9/2018) - All Rights Reserved
TP-821815-001C
