3.6
Opening and Closing Electronic Combination Locks
3.6.1
Opening the Safe Door
Follow the procedure below to open an electronic combination lock:
NOTE
If the electronic lock has the remote access feature, a remote
access signal may be required to complete this procedure.
Follow the procedures of your institution.
NOTE
For the following procedure, refer to Figure 3-11.
1. Insert the key into the safe door cover lock and turn the key clockwise.
2. Turn both fixed grip latches counterclockwise 90 degrees and open the
safe door cover.
3. Enter the combination of the lock through the lock keypad to unlock
the lock bolt (refer to the appropriate lock operating guide listed in
Appendix A for information on entering the combination of your lock).
4. Turn the handle of the safe clockwise until it stops.
5. Open the door of the safe and complete all maintenance (refer to the
appropriate maintenance manuals listed in Appendix A for information
about the maintenance procedures for your system).
3-24
Copyright ©Diebold, Incorporated (7/2015) - All Rights Reserved
Copyright ©Diebold Nixdorf, Inc. (4/2017, 9/2018) - All Rights Reserved
TP-821815-001C
