For security reasons, the institution should change the factory combination
immediately after the system has been installed. Refer to Appendix A for the
appropriate lock operating guide. Your lock's operating guide will contain
instructions on how to change the factory combination.
Electronic Combination Lock
The electronic lock for the safe has a keypad to enter the proper combination.
A smart key (encrypted electronic key) is also required to unlock combination
lock and open the safe.
Cencon Electronic Lock
This lock has a lock dial that spins to generate electrical power to operate a
keypad. Once the keypad is energized, the lock code can be entered on the
keypad.
Mechanical Keylock
A removable key may be used to unlock the lock. The handle is then turned to
open the door of the safe. A mechanical keylock can also be used before entering
the combination for the combination lock.
Mechanical Combination Lock
This lock requires a combination to be entered manually through the lock dial.
When the code is successfully entered, the lock dial is turned to the right to
release the lock bolt. Then the handle can be turned to open the safe.
Safe Opening Handle
The safe opening handle releases the safe door after the correct combination
is entered on the electronic combination lock keypad. Safe opening handles
are present with single mechanical combination locks and with electronic
combination locks.
Self-closing Feature for the Safe Door
There is a self-closing feature that closes the door boltwork and handle
automatically when the safe door is closed. To reopen the safe door, the
combination must be reentered.
NOTE
In all cases the operator should make a final check that the safe
door is shut and locked by trying to turn the handle and open
the safe door before leaving the system.
Determine which lock is installed on the safe (see Figure 3-10).
Refer to Section 3.6 for instruction on opening and closing electronic
combination locks.
Refer to Section 3.7 for instruction on opening and closing mechanical
combination locks.
3-23
Copyright ©Diebold, Incorporated (7/2015) - All Rights Reserved
Copyright ©Diebold Nixdorf, Inc. (4/2017, 9/2018) - All Rights Reserved
TP-821815-001C
