2.3.7
Safe Lock
The following safe types are used.
• UL safe
• CEN-L safe
The following locks are available:
• Mechanical combination lock
• Electronic combination lock
• Cencon electronic lock
• Mechanical keylock
Electronic locks are available with such features as a single combination,
dual combinations, remote access combination, etc. Refer to Section 3.6 for
information on using the electronic lock to open and close the door of the safe.
2.3.8
System Switches
System switches monitor the open or closed position of the system fascia, upper
chassis rear door, and door of the safe.
2.3.9
Alarm Sensors
Alarm sensors with a network interface report to a network and send alarm
signals to an alarm-monitoring system. Alarm sensors report during or after
one of the following events:
• The door of the safe is opened or closed (door status).
• The door of the safe is opened, but the combination was not entered
(burglary) available on single combination mechanical lock and on electronic
locks.
• The duress combination is entered (anti-ambush) available on single
combination mechanical lock and on electronic locks.
• Primary bolt work position sensor detects whether the bolt work is open or
closed.
• Secondary lock bolt position sensor.
Alarm sensors with a network interface provide their own battery backup. The
system uses the door of the safe switch to distinguish between an authorized or
unauthorized entry before sending an alarm signal.
2-31
Copyright ©Diebold, Incorporated (7/2015) - All Rights Reserved
Copyright ©Diebold Nixdorf, Inc. (4/2017, 9/2018) - All Rights Reserved
TP-821815-001C
