Warning and Caution Labels
The terminal may have any of the warning or caution labels shown below.
Strictly
observe the following safety concerns to reduce the risk of severe
personal injury, or death.
Label
Definition
Safety Concern
Electrical shock
hazard
An electrical shock hazard exists in the
area of the label. Do not remove covers.
Remove power before servicing.
Warning or danger
A personal injury can occur. Look for
nearby warning label (electrical shock,
pinch point, moving machinery, high
temperature hazard) or refer to the module
or terminal operating guide for the specific
hazard.
Pinch point
An area that can pinch (or cut) you exists
in the area of this label. Keep your hands
and fingers clear of pinch points.
Moving machinery
hazard
Moving parts that can snag or pull clothing,
hair, skin, or jewelry into the mechanism
are present in the area of this label. Keep
clothing, hair, skin, and jewelry out of the
mechanism.
High temperature
hazard
High temperatures that can cause pain or
burns are present in the area of this label.
Do not touch until cooled.
1.5
Radio Interference Label
This is a class A product. In a domestic environment this
product may cause radio interference, in which case the user
may be required to take adequate measures.
A warning label (see Figure 1-2) is included on ATMs available in Taiwan to
meet Taiwan Class A regulatory requirements for radio frequency interference.
1-4
Copyright ©Diebold, Incorporated (7/2015, 3/2017) - All Rights Reserved
Copyright ©Diebold Nixdorf (4/2020) - All Rights Reserved
TP-821813-001B
