3.11.2 Closing the Safe Door
NOTE
There is a self-locking feature that locks the bolt work when
the safe door closes. In the past, the safe door could close, but
the bolt work was not closed. Now when the safe door closes,
the safe handle turns, there is an audible beep and a light that
flashes when the bolt work closes. To reopen the safe door, the
combination must be reentered.
1. Close the safe door. See Figure 3-13. When the door is pushed and
reaches the closed position, the handle turns automatically in the closed
position.
2. If an optional mechanical key lock is present, insert the key into the
mechanical keylock slot and turn the key counterclockwise 180°.
3. Remove the key from the lock.
4. Make sure that the safe handle does not turn.
5. Pull firmly on the safe door to confirm that the safe is securely locked.
3-23
Copyright ©Diebold, Incorporated (7/2015, 3/2017) - All Rights Reserved
Copyright ©Diebold Nixdorf (4/2020) - All Rights Reserved
TP-821813-001B
