Motorized Card Reader
The motorized card reader (Figure 2-4) reads and writes magnetic stripe cards
and memory chip cards (smart or memory cards compliant with ISO 7816). The
card reader reads and writes tracks 1, 2, and 3 (or any combination of tracks 1,
2, and 3) on magnetic stripe cards. To minimize errors, the card is held in the
transport and the card reader can read tracks with errors again. A gate prevents
cards without chips or cards without track 2 from entering the card reader. The
gate also prevents the card being inserted incorrectly.
The card reader has an anti-skimming sensor to identify fraudulent card reader
devices. CIM86 is an available option with the reader.
The card reader has either an open bin or a locked bin to hold retained cards, both
bins hold cards that are not returned to consumers. A card may be retained for
the following reasons:
• The network commands the cash dispenser to retain the card.
• The card cannot physically be returned.
• The consumer fails to take the card within the time allowed after the
transaction session ended.
• A power failure occurs while the card is in the card reader, and the option
to return the card on power failure is not present.
Refer to the
Motorized Card Reader (with chip, 123) Operating Guide
(TP-820815-001C) for more information.
Figure 2-4 Motorized Card Reader
2-7
Copyright ©Diebold, Incorporated (9/2014, 3/2016) - All Rights Reserved
Copyright ©Diebold Nixdorf, Inc. (4/2017, 10/2017) - All Rights Reserved
TP-821765-001D
