• PS/SC V2.0 compliant
• Embedded protection against dual interface smart card damage with switch
feature to select the active interface (contact and contactless)
Figure 2-11 Contactless Card Reader
2.2.2
Devices in the Top Chassis Used by the Operator
The operator uses the following devices to perform routine operations, such as
setting up the system, balancing transaction reports, replenishing supplies, and
diagnosing problems:
• Rear operator display
• All-in-one module (the consumer display)
• USB port 2.0
• Dual USB port 2.0
• Maintenance mode switch
• Idle power (on/off) switch
• Hard drive disk (inside of the processor)
• External DVD/ROM (optional)
2-13
Copyright ©Diebold, Incorporated (9/2014, 3/2016) - All Rights Reserved
Copyright ©Diebold Nixdorf, Inc. (4/2017, 10/2017) - All Rights Reserved
TP-821765-001D
