© DICTATOR Technik GmbH • Gutenbergstr. 9 • 86356 Neusäß • Germany
Tel. +49(0)821-24673-0 • Fax +49(0)821-24673-90 • E-mail [email protected] • 20200708
Page 02.060.09
Technical Manual
DICTAMAT 50 BK-Z
D) Installation of the DICTAMAT 50 BK-Z on Double-
Leaf Doors
Function
: The door actuator for the second door leaf is fixed to the
other part (upper or lower, ill.12) of the belt so that the second door leaf
is moved automatically by the revolving belt.
Installation
:
Fix the door actuator for the second door leaf (Ill. 13) approximately
in centre of the second door leaf. The position has to be choosen so
that the clamping plate is at the height of the revolving belt it has to be
attached to.
Unscrew the clamping plate
and position the toothed belt so that it is
plced between the two screws. Now put back the clamping plate and
tighten it.
IMPORTANT
: The door actuator for the second door leaf has to be the
last to be mounted, when the belt is already tensioned.
2) Fixing of the Second
Door Leaf
With a DICTAMAT 50 BK-Z you can also move double-leaf doors.
Requirements:
- Simultaneous opening/closing of both door leafs (central closing!)
- Both leafs have the same dimensions.
- The force according to point E1 is sufficient for the double-leaf door.
1) Requirements
Default door
actuator with
belt fixing
Door actuator for the
second door leaf
Ill. 12
Ill. 13
OPEN
OPEN
For double-leaf doors you need just one additional component: the door
actuator for the second door leaf, part no. 701012 (zinc-plated).
