© DICTATOR Technik GmbH • Gutenbergstr. 9 • 86356 Neusäß • Germany
Tel. +49(0)821-24673-0 • Fax +49(0)821-24673-90 • E-mail [email protected] • 20200708
Page 02.060.06
Technical Manual
DICTAMAT 50 BK-Z
C) Installation of the DICTAMAT 50 BK-Z
- cont.
2) Assembling and
Installing the Radial
Damper, Determining
the Damping Direction
The radial damper LD 50 offers many different possibilities of installation,
depending on the available space.
1. Step:
Fixing the mounting brackets to the radial damper
- Determine at which position the brackets shall be screwed to the radial
damper.
Possible mounting positions: horizontal or vertical
The adjacent illustrations show some examples.
In case the included brackets should not be enough, there are additional
fixing accessories available.
- Screw the brackets to the radial damper (4 screws TORX T20 are
included, max. tightening torque 2 Nm).
2. Step:
Fixing of the toothed belt disc
- Deciding on the damping direction (the default toothed belt disc has a
freewheel in one direction)
- Check in which direction the toothed belt disc damps (just put it on the
axis and test)
- After having decided on the damping direction (= rotating direction of
the damper during closing), fix the toothed belt disc on the axis of the
radial damper according to the illustration 7. Keep also in mind the
illustrations 3a and 3b.
Ill. 6
Ill. 7
