© DICTATOR Technik GmbH • Gutenbergstr. 9 • 86356 Neusäß • Germany
Tel. +49(0)821-24673-0 • Fax +49(0)821-24673-90 • E-mail [email protected] • 20200708
Page 02.060.011
Technical Manual
DICTAMAT 50 BK-Z
0,5
1
1,5
2
0
0
50
100
150
200
U/min
Nm
LD50-2
LD50
Ill. 17
E) Adjustment of the Closing Force and Speed
- cont.
2) Adjustment of the
Closing Speed
In order to adjust the closing speed open the door completely.
Now adjust the closing speed during the closing of the door by turning
the adjustment screw at the radial damper (Allen key 5.5 mm or slotted
screw driver) (see ill. 16).
Turning it clockwise:
reduces the closing speed
Turning it anticlockwise:
increases the closing speed
Now check whether the spring closes the door out of any open position
independent from how far it had been opened. If necessary increase
the tension of the spring or reduce the damping.
IMPORTANT
: Pretension the spring only when the door is completely
open!
Adjustment screw for the
closing speed
Damping Force
Ill. 16
Maximum adjustment LD50
Minimum adjustment LD50-2
