© DICTATOR Technik GmbH • Gutenbergstr. 9 • 86356 Neusäß • Germany
Tel. +49(0)821-24673-0 • Fax +49(0)821-24673-90 • E-mail [email protected] • 20200708
Page 02.060.04
Technical Manual
DICTAMAT 50 BK-Z
C) Installation of the DICTAMAT 50 BK-Z
1) Determination of the
Installation Position
Ill. 3a
With the DICTAMAT 50 BK-Z the spring rope pulley can be installed
either on the left or right side of the door. Usually the radial damper
LD 50 is installed beside the spring rope pulley (see ill. 3a and 3b). In
case of space problems there can be exchanged e.g. the positions of
the radial damper and the idler pulley.
The
closing direction
determines the position of the spring rope pulley.
With a DICTAMAT 50 BK-Z the door always closes towards the spring
rope pulley. I.e. when it is mounted on the right, the door closes to the
right. The same applies when the spring rope pulley is mounted on the
left side of the door.
The
damping direction
shown below has to be observed when in-
stalling the radial damper according to point C2!
Ill. 3b
Door closing to the right
Door closing to the left
IMPORTANT:
When choosing the fixing point of the rope of the spring rope pulley, you have to make
sure the working travel of the spring rope pulley allows the complete travel of the door!
Damping anticlockwise
Damping
clockwise
