background image

© DICTATOR Technik GmbH • Gutenbergstr. 9 • 86356 Neusäß • Germany

Tel. +49(0)821-24673-0 • Fax +49(0)821-24673-90 • E-mail [email protected]  • 20200708

Page  02.060.013

Technical Manual

 DICTAMAT 50 BK-Z

G) List of Spare Parts

Below you will find the individual spare parts and their part numbers.

Part no.

Radial damper LD 50, without bracket, without belt disc

244045

Toothed belt disc Z26-HTD5M

244203

Door actuator with toothed belt tensioner, zinc-plated steel 701010
Door actuator for second door leaf, zinc-plated steel

701012

Idler pulley with fixing brackets, zinc-plated steel

701011

Idler pulley with fixing brackets, AISI 304

701053

Idler pulley without fixing brackets

701051

Toothed belt HDT5, 10 mm wide, per m

710502

Spring rope pulley 25 N with sliding hub, bracket zinc-plated 070102
Spring rope pulley 50 N with sliding hub, bracket zinc-plated 070093
Spring rope pulley 80 N with sliding hub, bracket zinc-plated 070094
Spring rope pulley 25 N with sliding hub, bracket AISI 304

070103

Spring rope pulley 50 N with sliding hub, bracket AISI 304

070098

Spring rope pulley 80 N with sliding hub, bracket AISI 304

070099

Rope for spring rope pulley

700058

 

Revolving 

toothed belt

Toothed belt disc LD 50

Spring rope pulley with bracket

Idler pulley with 

fixing brackets

Door actuator 

with belt 

tensioner

Radial damper 

LD 50

Idler pulley, 

without fixing brackets

Ill. 19

Door actuator for 

second door leaf

Summary of Contents for DICTAMAT 50 BK-Z














Reviews: